How to build a your own complete wheels from EIE carbon if you do not find any ready wheels configuration ?Please go to custom wheels channel and do your best to enter the information as detailed as you can. All EIE carbon wheel was built by hand for you.Single front or rear wheel is available.
Absolutely,EIE’s engineer is committed to Carbon bike industry for more than 10 years.So 99% concerns will be solved and got professional advice here.We believe you'll find that an upgrade to EIE carbon rims vastly improves the overall biking experience.Can’t wait to hear your voice!
Carbon fiber has been used on bicycles as a high-tech material for the last ten years. Carbon fiber is not strictly a carbon element, but a mixture of carbon elements that are braided and bonded and reinforced by epoxy resin.Carbon fiber is a new type of composite material, which has the advantages of light weight, high specific strength, high specific stiffness, and can be designed and molded easily, thus making the designed structure more efficient.
T700:The standard XC/AM/DH version were constructed Premium Toray T700 Carbon fiber.
T700+T800 component:The super light series EIE carbon rim were constructed with properly component of Toray T700+T800.We cut the material size of the nipple bead area and strengthen the key parts of spokes to maintain the strength of the overall carbon rims.
The spoke hole angle design of the rim is very important , but its design angle range is limited . If the design does not match the design of the spoke hole angle of the hub , the bending phenomenon of the spoke can be generated .When our EIE carbon rims drill angled holes, the spacing and angle of each hole are calculated accurately to ensure that when the rim is connected to the drum through the stripes, no additional pressure is generated around the rim hole
The layer-up of each carbon rim is carefully designed, repeated tests and then determine final standards document. After that,we’ll send it to our layer up workers, who operate according to the operating standards. They cut the size of the material according to the layer- up instructions to produce materials for any part that can be used to increase the strength of the side part of the wheel set, to fit the grooves of the rims, to enhance the impact resistance of the wheels.
The rim was designed for tubeless compatible that means It is suitable for tubeless tires. This makes it greatly possible to reduce overall bike weight while improving cycling performance.
The material is a combination of high temperature resistant epoxy resin and carbon fiber.It has excellent heat resistance and the highest test temperature values can be up to 250 degrees Celsius.In general,the maximum of rim TG resin can only reach 180 degrees when biking at high speed.
Sharing the photos of your bike with us ,looking forward to seeing EIE carbon rim/wheels in your bike,
EIE team will be closed office for our 2019 Lunar Spring Festival from 1st,Feb. to 11th,Feb..Here, we are very thankful to all the customer who supported us in 2018, and thank you for your efforts to make us be a trusted brand.In 2019, we are looking forward to meeting you all with qualified product and excellent service as always.
The main purpose of this series of products is to solve the problem of dynamic impact.In other words,dynamic impact design was born to solve the traditional hookless carbon rim design problems.Of course,traditional hookless rims are strong, stiff, and light still, but it is are very susceptible to pinch flatting tires especially to run lower tire pressure .
3K weave is better because it is not as brittle as the UD. It displaces some of the pressure because it is not as hard as UD. However, this doesn't mean 3K is always better, because UD generally gives rim the most strength and allows the engineer more control in the layup patterns to optimize the rim structure.